|
|
INSTALLATION INSTRUCTIONS |
Tools Needed
- Power Drill
- 2 3/8" Hole Saw
- 1/8" Drill Bit.
|
|
| * Instructions are applicable for all doors
whether they are solid, hollow or metal. * DU SEUNG TRADING CO. recommends
the retainer ring to be used for all doors, for added strength and looks. |
Installation
Instructions
| Step 1 |
Stick the provided transparent template on the outside of door at the desired installation position. |
| Step 2 |
With
a 2 3/8” hole saw (drill bit attached inside), starting on the exterior
side of door, drill two 3/8" holes until the drill bit protrudes
through the interior side of door at least 1/8". Then go to the inside
and finish drilling the hole out. |
| Step 3 |
Drill two 1/8" holes for the retainer ring locking pins approximately 1/8" in depth, as indicated on the template.
|
| Step 4 |
Separate the locking ring by unscrewing from the main body. |
| Step 5 |
Insert main body into hole from the exterior side and place the pins in the holes. |
| Step 6 |
Secure snug and turn the locking ring until there is contact with the door surface.
|
TEMPLATE
Actual size of template: W 3-3/4” x H 4-0”
Enjoy your new feeling of security with Door
Scope. |
|
Quick, Accurate and reliable identification of all
visitors.
Durable & Maintenance Free
Inexpensive
Easy installation
Available in 36 countries
|
|
|
|
|
AB Group
PO Box 681195
San Antonio, Texas 78268-1046
Tel: (210) 684-1635
Fax: (210) 684-2464
doorscope@stic.net |
|
